StartseiteResins + HardenersEpoxy resinsEpoxy casting resins water clear
Processing time
Heat resistance
Certificates etc.
Available
Color
 
 
 
 
 
 

More Information: Glues can be found here

Epoxy Casting Resins

Casting resin type Description Casting thickness Processing time Curing Mixing ratio
Resin : Hardener		 Price
Epoxy Casting Resin
WATER-CLEAR
+ Hardener W 300		 For lower casting thicknesses in one step,
multilayer potting is possible.		 2 cm 300 minutes 24 - 72 hours 100 : 35
parts by weight		 €
Epoxy Resin HT 2
+ Hardener HT 2		 For low casting thicknesses and coatings 0.5 cm 45 minutes 12 - 24 hours 100 : 48
party by weight		 €€€

€ = low price, €€ = medium price, €€€ = higher price

All data on thicknesses, processing time and curing time are only approximate values. A large number of parameters such as temperature, casting volume, substrates have a decisive influence. The values may therefore deviate considerably in practice.

What is important in processing?

  1. Determine the required resin/hardener quantity. The R&G resin calculator helps you to do this.
  2. Weigh components accurately and mix resin and hardener thoroughly (drill +mixing propeller); then repot into a clean container and mix again.
  3. Allow the batch to stand for 15 - 30 minutes to deaerate. Remove rising air bubbles, which lie as foam on the surface after casting, with a hot air gun or gas flame (fire hazard).
  4. Set up fans (cold air) above the casting (e.g. Rivertable); this has proven effective in preventing overheating.

 

Hardener W 300 (300 min)

Hardener W 300 (300 min)
Single packs: 1.75,
3.5, 8.75 and 26.25 kg 
from  43,74 €  / Stück/pc.

Epoxy Resin HT 2 + Hardener HT 2 (45 min)

Epoxy Resin HT 2 + Hardener HT 2 (45 min)
Set of two components:
296 g and 1 kg 
from  18,31 €  / Pck./pack

Epoxy Resin HT 2

Epoxy Resin HT 2
Single packs:
2, 5, 10 and 30 kg 
from  71,29 €  / 2 kg

Hardener HT 2 (45 min)

Hardener HT 2 (45 min)
Single packs: 960 g,
2.4, 4.8, 9.6, 24 kg 
from  28,52 €  / Stück/pc.

Epoxy Casting Resin WATER-CLEAR + Hardener W 300

Epoxy Casting Resin WATER-CLEAR + Hardener W 300
Set of two components:
675 g, 1.35 kg, 3.375 kg 
from  18,98 €  / Pck./pack

Epoxy Casting Resin WATER-CLEAR

Epoxy Casting Resin WATER-CLEAR
Single packs:
5, 10, 25 and 200 kg 
from  82,46 €  / 5 kg