EP-Gelcoat colourless + Hardener GL 1 (20 min)

Set of two components:
645 g and 1.29 kg

EP-Gelcoat colourless + Hardener GL 1 (20 min)

EP-Gelcoat colourless + Hardener GL 1

Colourless, transluent (not transparent)
Can be dyed with colour pastes
Thixotropic (non-drip)
Manufactured under vacuum, so optimally free of air bubbles and homogeneous
No permanent resistance to UV light(yellowing does occur), it therefore should be protected, where appropriate, against UV radiation with an additional coating (clear coat or opaque paint)

This colourless, non-drip formulated gelcoat can be dyed opaque with our Universal Colour Pastes and transparent/translucent with our Transparent Colours.

To be applicated by brush, roller or spatula.

Consumption: approx. 0.3 kg/m²

Mixing ratio: 100 : 29 parts by weight of resin to hardener
Processing time (100 g/22 °C): 20 minutes
Gelling time (0.2 mm/22 °C): approx. 110 minutes
Curing time (22 °C): 24 hours

Curing from 10 °C possible
Glass transition temperature (Tg): > 80 °C (with heat curing 70 °C / 15 h)
No brittleness with pure cold hardening (at 20 °C

Storage/shelf life: In unopened original containers, dark and above 15 °C at least 2-3 years.

EP-Gelcoat colourless + Hardener GL1 (20 min) kit/ 645 g

(= 500 g resin + 145 g hardener, Mixing ratio parts by weight = 100:29)

Item no. 1201021 Only 3 left in stock, more on the way (delivery time 1-2 days)

Add to Shopping List

40,95 €

(Base Price 59,35 € / kg)

Scaled Price

From Qty 2: 5,00%
From Qty 5: 10,00%

- +

EP-Gelcoat colourless + Hardener GL1 (20 min) kit/ 1,29 kg

(= 1 kg resin + 290 g hardener, Mixing ratio parts by weight = 100:29)

Item no. 1201022 Only 2 left in stock, more on the way (delivery time 1-2 days)

Add to Shopping List

72,49 €

(Base Price 56,19 € / kg)

Scaled Price

From Qty 2: 5,00%
From Qty 5: 10,00%

- +

all Prices price incl. VAT, possibly plus shipping

Article information

MSDS EP-Gelcoat colourless (PDF)

MSDS hardener GL 1 (PDF)

Processing information Epoxy resin systems (PDF)

Videos

Hazards identification - EP-Gelcoat colourless

Hazard components for labelling

bis-[4-(2,3-epoxipropoxi)phenyl]propane
Reaction mass of 2,2'-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4- (oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2'- [methylenebis(2,1-phenyleneoxymethylene)]dioxirane
1,6-Hexanediol, reaction products with epichlorohydrin

Signal word: Warning

Pictograms:

Hazard statements

H315	Causes skin irritation.
H317	May cause an allergic skin reaction.
H319	Causes serious eye irritation.
H411	Toxic to aquatic life with long lasting effects.

Precautionary statements

P260	Do not breathe dust / fume / gas / mist / vapours / spray.
P273	Avoid release to the environment.
P280	Wear protective gloves / protective clothing / eye protection / face protection.
P314	Get Medical advice / attention if you feel unwell.

Hazards identification - Hardener GL 1

Hazard components for labelling

3-aminomethyl-3,5,5-trimethyl-cyclohexylamine
Salicylic acid
1,3-Benzoldimethanamine
2,2,4-trimethylhexane-1,6-diamine
Reaction mass of (1-phenylethyl)phenols and bis-(1-phenylethyl)phenols

Signal word: Danger

Pictograms:

Hazard statements

H302	Harmful if swallowed.
H314	Causes severe skin burns and eye damage.
H317	May cause an allergic skin reaction.
H318	Causes serious eye damage.
H361d	Suspected of damaging the unborn child.
H412	Harmful to aquatic life with long lasting effects

Precautionary statements

P260	Do not breathe dust / fume / gas / mist / vapours / spray.
P303 P361 P353	IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310	Immediately call a POISON CENTER or doctor / physician.
P362 P364	Take off contaminated clothing and wash it before reuse.
P405	Store locked up.
P501	Dispose of waste according to applicable legislation.