Spray adhesive FOGTAC (green), 500 ml
Spray adhesive FOGTAC (green), 500 ml

green

Diatex
more products by Diatex

Spray adhesive FOGTAC (green), 500 ml

*This strong Diatex spray adhesive has a strong bonding strength slightly above that of the INFUTAC spray adhesive. The fogging effect facilitates the evaporation of the solvents and allows a fast adhesion to the surface of the reinforcements and limits the amount between each layer of adhesive.

FOGTAC does not interfere with resin flow and therefore does not cause marking problems.

  • Adjustable spray head (Set nozzle to L (Low) M (Middle) or H (High) to adjust flow).
  • With green indicator to control the application.
  • The outlet nozzle cannot become clogged
  • Suitable for vacuum infusion and RTM

FOGTAC has been developed for vacuum infusion and the RTM process and ensures a perfect bonding and shear-bonding* of the reinforcement layers during the draping process.

*Fabrics can be shear-bonded by spraying with FOGTAC. After drying, the fabrics can then be further processed as usual and impregnated with resin.

Processing with epoxy resins
FOGTAC is compatible with most resins but is subject to validation by the user.

Diatex

Spray Adhesive FOGTAC Green, tin/ 500 ml

Item no.  1591061 66 in stock  (delivery time 1-2 days)

Add to Shopping List

24,92 €
(Base Price 49,84 € /  L)

Scaled Price

  • From Qty 2:  10,00%
  • From Qty 6:  15,00%
  • From Qty 12:  20,00%
  • From Qty 24:  25,00%
  • From Qty 48:  30,00%
- +

all Prices  price incl. VAT, possibly plus shipping

Article information

type: ga
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Instructions for use
type: si
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
MSDS
Safety Data Sheet for Spray Adhesive FOGTAC (Green) (PDF)
type: pi
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Product information
type: td
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Technical Data Sheet for Spray Adhesive FOGTAC (Green) (PDF)
type:
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]

Hazards identification - Spray adhesive FOGTAC (green), 500 ml

Hazard components for labelling

PETROLEUM GASES, LIQUEFIED; PETROLEUM GAS <0.1 % 1,3 BUTADIENE
Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane
METHYLACETATE
ACETONE

Signal word: Danger

Pictograms:

GHS02 GHS07

Hazard statements

H222 Extremely flammable aerosol.
H229 Pressurised container: may burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P302 P352 IF ON SKIN: Wash with plenty of water.
P304 P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P312 Call a POISON CENTER or doctor / physician if you feel unwell.
P332 P313 If skin irritation occurs: Get medical advice / attention.
P337 P313 If eye irritation persists: Get medical advice / attention.
P362 P364 Take off contaminated clothing and wash it before reuse.
P410 P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F.
P501 Dispose of waste according to applicable legislation.