VOSS UP Laminating Resin VC AZUR Super plus, 5 kg
Die Chemikalien-Verbotsverordnung verbietet den Verkauf dieses Produkts an private Endverbraucher.
Der Verkauf ist leider nur noch an Wiederverkäufer, berufsmäßige Verwender sowie öffentliche Forschungs-, Untersuchungs- und Lehranstalten möglich.
Wir bedauern dies sehr, bitten aber um Verständnis, dass wir das gesetzlichen Abgabeverbot einhalten müssen.
VOSS UP laminating resin VC AZUR Super plus is a pre-accelerated, unsaturated polyester resin for cold curing with greatly reduced styrene vapor release (milieu resin).
- Low-viscosity, thixotropic orthophthalic acid resin for medium loads
- Contains additives to reduce styrene evaporation and control the addition of hardener
- Limited reaction temperature during curing (peak brake), so thicker laminates can also be cured
- Improved curing behavior at low temperatures
- The resin becomes clear-transparent after half the processing time
Processing:
The resin is cured with 1 to 3 % MEKP hardener (see technical data sheet)
The addition of hardener is checked by a color indicator, which changes from blue to green within a few minutes after the addition of MEKP.
Potlife at 20° C with 1 % MEKP (100 g Mix): approx. 40 minutes
Application:
The resin can be used in wet layers up to 7 mm thick.
It is suitable for:
With glass fiber reinforcement excellent for the hand lay-up and fiber spraying process for e.g. elements for construction, boat building, vehicle construction, pool coatings, covers for machine parts, furniture production.
Provided with fillers as: Casting resin, e.g. for casting electrical circuits, polyester concrete, casting compounds for artistic work, for coatings and molded parts.
Technical Data:
Specification liquid resin:
Colour |
blue, transparent |
Viscosity at 20° C ( Brookfield ) in mPa.s |
900 - 1.100 (thixotropic) |
Styrene content ( B070 ) in % |
approx. 40 |
Specific weight at 20° C (ISO 2811-1974) in g/cm³ |
1.1 |
Flashpoint (ASTM D 3278-95 ) in ° C |
approx. 32 |
Refractive index at 20 ° C |
1.54 |
Shrinkage during the curing process in Vol.-% |
approx. 7 |
Specification cured resin:
|
Reinforced with 35 % Glass Fibre Mat |
Not Reinforced |
Tensile strength (ISO 527-1/2-1993 ) in N/mm² |
130 |
55 |
Tension E- Modulus (ISO 527-1/2 -1993 ) in N/mm² |
12.000 |
- |
Elongation at break (ISO 527-1/2 1993 ) in % |
2 |
1.6 |
Impact resistance (ISO 179 - 1993 ) in kJ/m² |
80 |
- |
Compressive strength in N/mm² |
180 |
160 |
Bending strength (ISO 178 -1993 ) in N/mm² |
220 |
95 |
Bending E- Modulus (ISO 178 -1993 ) in N/mm² |
9.500 |
4.100 |
Dimensional stability under Heat according to Martens (DIN 53 458) in ° C |
- |
80 |
Breakdown voltage (50 Hz. 0.5 kV/s) VDE 0303, Part 2, 95 mm Ø; 1 mm ( Minimum Value Dry ) in kV/cm |
- |
200 |
Water absorption after 28 days in % |
- |
0,75 |
These specifications have been made using cold cured test plates that have been postcured for two hours at
100 °C after hardening at ambient temperatures.
Storage:
Shelf life in the unopened original container, stored in a cool and dark place: minimum 6 months