The Chemicals Ban Ordinance prohibits the sale of this product to private end consumers. Unfortunately, sales are only possible to resellers, professional users and public research, investigation and educational institutions. We regret this very much, but ask for your understanding that we must comply with the legal prohibition. Universal polyester putty for professional use; for filling and fine filling of holes and imperfections in one go Application: Excellent adhesion on bare metal, wood, concrete, glass-fibre reinforced plastics, etc.. For filling holes and imperfections in one go. Spattle over by pretreated repairs for car body parts. Metal surfaces, repairing and restoration from wood and concrete surfaces Technical data: Sanding after: approx. 20 to 30 minutes Pot life (at 70 °F = 20 °C): approx. 4 to 5 minutes Flash point: approx. 33 °C Density (at 70 °F = 20 °C): 1.8 g/cm³ Hardener: 2–3 % Temperature resistance of the cured material: up to 160 °C Resistant against: solvents, propellants, acid, base, humidity, and road salt No differentiation for the following surfaces is necessary: galvanic zinc-coated, hot-dip galvanized or aluminium Important: Protect product from frost and heat. Storage temperature is about 59 °F (15 °C) and 77 °F (25 °C). Shelf life:12 months, by cool and dry storage of unopened can.