CARBOWEAVE® UMS Carbon NCF 19 g/m² (biaxial)
Due to a worldwide shortage of raw materials, there is, unfortunately, a delay in the delivery of this item.
Fibre: Tenax® UMS40 24k / 800 tex
Width: 60 cm
Length: 310 cm
Construction: -/+ 45°
Surface weight (g/m²): 9.5 / 9.5
Application:
Motorsports, marine construction, sports equipment and model construction. This biaxial NCF has 2 unidirectional plies laid at an angle of ± 45° which are bonded with an epoxy-compatible binder to each other. Drapability is improved compared to conventional NCF with plastic scrim. Due to a very low thread deflection, the properties of the fibres are better exploited. Particular advantage: torsional layers could be done without an offcut.
Calculated data for hand laminates with 35 volume per cent fibres:
Resin consumption: 22 g/m², laminate thickness: 0.030 mm, laminate weight: 41 g/m²
Versions with Tenax® IMS65 for very robust, with Tenax® UMS40 for very stiff and with Tenax® HTS40 for robust parts are available.
Comparison of Tenax® Fibres
| |
IMS65 |
UMS40 |
HTS40 |
| Tensile strength, MPa |
6000 |
4700 |
4400 |
| Tensile modulus, GPa |
290 |
390 |
240 |
| Elongation at break, % |
1.9 |
1.2 |
1.8 |
R&G is the official sales partner for CARBOWEAVE Spread Tow fabrics. We are very pleased to be able to offer our customers the 2nd generation of ultra-light carbon fibre fabrics, which already show a clear difference in quality. The fibre distribution of the individual layers is much more homogeneous, so there are no nests or holes in the scrim. The fibre orientation - the perhaps even more important criterion - is very straight and virtually free of undulation. In addition, improved surface quality is also achieved compared to the preceding materials.
