Single packs:
750 g, 3, 7.5 and 20 kg

Hardener CL (60 min)

Hardener for Epoxy Resin L

The resin system Epoxy Resin L + Hardener CL yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres. It is especially suitable for carbon coating of automotive parts.

Low viscosity (70 - 120 mPa•s, at 25 °C)
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) > 90 °C (post-curing at 70 °C / 15 h)
High static and dynamic strength (equal to Epoxy Resin L 285 with Hardener 285)
Free of nonylphenol and DETA

Processing time: 60 minutes (100 g / 20 °C)

Mixing ratio:
100 : 30 parts by weight resin : hardener
100 : 35 parts by volume resin : hardener

The resin system is ambient curing and develops no distinctive brittleness even at curing temperatures below 20 °C (for at least 48 h). We however recommend, to improve the physical and chemical properties, to perform a post-curing at least at 40 °C over 15 h.

It exhibits a very good price/performance ratio and is suitable for the following processing procedures:

Hand laminating
Vacuum moulding
Press moulding

Technical Data:

Viscosity at 23°C in mPa*s	70-120
Density at 23 °C in g/cm³	0.95-0.97
Colour (Gardner)	< 2
H*-equivalent weight in g/Eq	54
Solid content in %	100

Mechanical properties (pure resin cured*) of Epoxy Resin L + Hardener CL

Flexural test
Flexural strength DIN EN ISO 178 in MPa	137
Surface strain at maximum stress	6.8 %
Surface strain (no specimen failure)	7 %
Flexural modulus	3220

Tensile test
Tensile strength (DIN EN ISO 527) in MPa	82.8
Elongation at maximum strain	4.9 %
Elongation at break	5.5 %
Tensile modulus in MPa	3190

Compression test
Compressive strength (DIN EN ISO 604) at 6 % compression	111

Shrinkage
Linear shrinkage (DIN EN 12617-1)	0.3 %

*at 1 h 23 °C + 5 h 70 °C + 5 h 80 °C)

CYTOX Expertise for the resin system Epoxy resin L + Hardener CL: this system is not cytotoxic (cell damaging), important for applications in medical purposes!

Please order Epoxy Resin L separately.

Hardener CL (60 min) bottle/ 750 g

required resin quantity: 2.5 kg Epoxy resin L

Item no. 109285-H-2 Only 12 left in stock, more on the way (delivery time 1-2 days)

Add to Shopping List

24,63 €

(Base Price 32,84 € / kg)

- +

Hardener CL (60 min) canister/ 3 kg

required resin quantity: 10 kg Epoxy resin L

Item no. 109285-H-3 Only 5 left in stock, more on the way (delivery time 1-2 days)

Add to Shopping List

75,33 €

(Base Price 25,11 € / kg)

- +

Hardener CL (60 min) canister/ 7.5 kg

required resin quantity: 25 kg Epoxy resin L

Item no. 109285-H-4 Only 6 left in stock, more on the way (delivery time 1-2 days)

Add to Shopping List

170,12 €

(Base Price 22,68 € / kg)

- +

Hardener CL (60 min) canister/ 20 kg

required resin quantity: 66,7 kg Epoxy resin L

Item no. 109285-H-5 Only 2 left in stock, more on the way (delivery time 1-2 days)

Add to Shopping List

420,51 €

(Base Price 21,03 € / kg)

Scaled Price

From Qty 2: 5,00%
From Qty 5: 10,00%

- +

all Prices price incl. VAT, possibly plus shipping

Article information

MSDS Hardener CL (60 Min.) (PDF)

CYTOX Test report with Hardener CL (PDF)

Technical Data Sheet Epoxy Resin L and Hardeners (PDF)

Processing information Epoxy resin systems (PDF)

Hazards identification - Hardener CL

Hazard components for labelling

3-aminomethyl-3,5,5-trimethylcyclohexylamine
Cyclohexanemethanamine, 5-amino-1,3,3-trimethyl-, reaction products with bisphenol A diglycidyl ether homopolymer
Benzyl alcohol

Signal word: Danger

Pictograms:

Hazard statements

H302	Harmful if swallowed.
H314	Causes severe skin burns and eye damage.
H317	May cause an allergic skin reaction.
H318	Causes serious eye damage.
H412	Harmful to aquatic life with long lasting effects

Precautionary statements

P260	Do not breathe dust / fume / gas / mist / vapours / spray.
P303 P361 P353	IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
P310	Immediately call a POISON CENTER or doctor / physician.
P362 P364	Take off contaminated clothing and wash it before reuse.
P405	Store locked up.
P501	Dispose of waste according to applicable legislation.

Hazards identification - Epoxy Resin L

Hazard components for labelling

2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] bisoxirane
Reaction mass of 2,2'-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4-(oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2'-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane
Reaction products of hexane-1,6-diol with 2-(chloromethyl) oxirane (1:2)

Signal word: Warning

Pictograms:

Hazard statements

H315	Causes skin irritation.
H317	May cause an allergic skin reaction.
H319	Causes serious eye irritation.
H411	Toxic to aquatic life with long lasting effects.

Precautionary statements

P261	Avoid breathing dust/fume/gas/mist/vapours/spray.
P273	Avoid release to the environment.
P280	Wear protective gloves / protective clothing / eye protection / face protection.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P333 P313	If skin irritation or a rash occurs: Get medical advice / attention.
P501	Dispose of waste according to applicable legislation.